May 16, 2020

Jaguar Land Rover named 'most trustworthy supplier' worldwide

Jaguar Land Rover
suppliers
Supplier Information
Manufact
Glen White
1 min
A worldwide survey has found that British firm, Jaguar Land Rover is the most trustworthy automotive supplier.
A worldwide survey has found that British firm, Jaguar Land Rover is the most trustworthy automotive supplier.The annual survey, conducted by HIS Automo...

A worldwide survey has found that British firm, Jaguar Land Rover is the most trustworthy automotive supplier.

The annual survey, conducted by HIS Automotive, surveys 1,000 middle and senior managers who deal with global automotive manufacturers. It takes into account five key aspects of service including:

  • Profit potential
  • Trust
  • Pursuit of excellence
  • Organisation
  • Outlook

Jaguar Land Rover (JLR) was a frontrunner in two of the five categories and its overall score was 603 – an 11.7 percent increase on the previous year.

JLR employs more than 190,000 people in the UK and has been instrumental in balancing the UK economy in recent years. According to the survey, the treatment of supplier intellectual property and responsiveness in considering supplier technology were named as particular strengths in their operations.

Ian Harnett Director of Purchasing said, “Jaguar Land Rover has ambitious plans for growth which will see the introduction of new and refreshed product lines. Our ability to deliver these products to market lies with the ability of our suppliers to deliver quality components in volume. The suppliers’ view is testament to the responsive manner in which we work, and we are proud to have achieved the highest ratings ever in the history of the OEM study on suppliers’ view of Jaguar Land Rover’s long term outlook.”

Share article

Jun 23, 2021

Hexagon Revolutionises Manufacturing Design Process

Hexagon
Fugaku
fujitsu
Manufacturing
Elise Leise
3 min
Fugaku’s supercomputer allows Hexagon’s clients can use complex CFD simulation to drive innovation in next-gen aircraft and electric vehicle manufacturing

A global leader in sensor, software and autonomous solutions, Hexagon recently announced that complex CFD (computational fluid dynamics) simulations can now be completed with the help of the world’s fastest supercomputer, Fugaku. Before this breakthrough, CFD simulations were far too expensive and time-consuming to run. Now, however, engineers can use these high-detail simulations to explore new ideas, iterate their designs, and optimise next-gen aircraft and electric vehicle manufacturing. 

 

Thanks to Hexagon, manufacturers can now analyse what they’re up against before starting their build process—with one-third the energy use of traditional simulations and a fraction of the cost. This is only the latest step in Hexagon’s mission to use design and engineering data to speed up smart manufacturing. As the company wrote: ‘The idea of putting data to work is part of Hexagon’s DNA’. 

 

What Are CFD Simulations?

Simply put, they’re simulations so complex and powerful that engineers usually have to spend hours upon hours simplifying their designs. 90% of an engineer’s time can centre around this task—but not with Fugaku-powered simulations. Now, original designs can be fed into the simulation software, reaching a much closer approximation of reality. 

 

With the ARM-powered Fugaku supercomputer, Hexagon’s Cradle CFD clients can now reduce simulation cost, conserve valuable energy, and integrate high-detail simulations into their daily operations. At a time when the automotive and aerospace industries are racing to bring safe and sustainable transport options to market, in fact, CFD simulations could be the key to success. 

 

How Does CFD Change the Game? 

As auto manufacturers transition to electric vehicles, they must understand how design adjustments will affect the vehicle in real-time. Instead of physically iterating their blueprints, they’d rather work it out in theory. With CFD, engineers can now pre-test critical safety, performance, and longevity features—for example, how aerodynamics will interact with energy efficiency, or how thermal management will operate under a range of parameters. Essentially, CFD simulations speed up the design process and cut down on costly mistakes. 

 

Said Roger Assaker, President of Design & Engineering in Hexagon’s Manufacturing Intelligence division: ‘Simulation holds the key to innovations in aerospace and eMobility. Advances such as the low-power Fugaku supercomputing architecture are one of the ways we can tap into these insights without costing the Earth, and I am delighted by what our Cradle CFD team and our partners have achieved’. 

 

 

How Did Testing Unfold? 

Hexagon collaborated with Fujitsu Limited to create and complete several test situations. Here’s a quick look at two of their trials: 

  • Prototyped a typical family car. This is only possible with enhanced computing power. The car model consisted of 70 million elements using 960 cores and was simulated until it reached a  steady-state using the RANS equation over 1000 cycles. 
  • Simulated transonic compressible fluid around an aeroplane. Made up of approximately 230 million elements, the simulation used 4,000 nodes using 192,000 computing cores and relied on 48,000 processes via Message Passing Interface (MPI). 

Tomohiro Irie, Hexagon’s Director of R&D for Cradle CFD, commented on the recent progress: ‘I expect that these technical developments will contribute to making the power of Fugaku more accessible for general use, bringing huge freedom and improved insights to engineering teams solving tomorrow’s problems today’. 

Overall, Hexagon intends to continue driving product innovation forward, with smart manufacturing that adapts to conditions in real-time, pursues perfect quality, and optimises designs for zero waste. And there’s little doubt about it. With 20,000 employees in 50 countries, coupled with Fugaku’s supercomputing capabilities, Hexagon is uniquely poised to succeed.

Share article